WhatsApp or SMS: 07087083227
Click here to Get The Complete Research Project Chapter 1-5

Full Project – EVALUATION OF HEALTH AND SAFETY PRACTICES ON CONSTRUCTION SITES IN NIGERIA

Click here to Get this Complete Project Chapter 1-5

CHAPTER ONE

INTRODUCTION

1.0 BACKGROUND OF THE STUDY:

In measuring the construction industry’s performance/development; the industry’s contribution to gross domestic products (GDP) and employment, disposition to change, meeting client’s satisfaction are the measuring parameters (Tse and Ganesan, 1997; Crosthwaite, 2000). Lowe (2003) further stated that the value added of construction to the economy is in the range of 7% to 10% for highly developed economies and around 3% to 6% for underdeveloped economies. Adelekan (2012) noted that this is portrayed by an increasing rate of city development in virtually all parts of the Nigerian economy with notable growth in some areas.

Although the construction industry has a high incidence of occupational ill health which can have a devastating effect on individuals, their families, and their employers who may face fines and prosecution, efforts have usually been focused more on safety hazards rather than on workplace hazards resulting in ill health issues. The nature of the activities going on in the industry makes it one of the most dangerous workplaces with over thousands of people killed in the past years from work related accidents and injuries sustained in the workplace. Characterized by its complexity and hazardous nature; the workers on site are therefore exposed to several risk factors as the project is being executed.

The relevance of the construction industry in a nation’s economy cannot be over emphasized as the development and growth of such nation is inclusively dependent on the performance of the industry, (Okeola, 2009). This performance is visible in areas such as the construction of roads, bridges, skyscrapers, dams, and buildings (Occupational Safety and Health Administration. (OSHA) 2007). National Construction Council (NCC) (2004-2005) defined the construction industry as a complex fundamental sector of the economy such that it permeates most of the other sectors in transforming various resources into physical economic and social infrastructure necessary for economic development. It embraces the process by which the physical infrastructure are planned, designed, procured, constructed or produced, altered, repaired, maintained, and demolished.

A number of studies have focused on the issue of employment creation by the industry and others have emphasized on its multiplier effect as it relates other sectors of the economy. Wibowo (2009) defined the multiplier effect as one that demonstrates the impact of a change in investment on the levels of income and employment in an economy. The main concept of the multiplier is based on the recognition that the various sectors that make up the economy are interdependent. The role of construction infrastructure in the process of development has gained a new stimulus in that construction activities are considered to be one of the major sources of economic growth, development and economic activities (Ehsan, Alam, Mirza & Ishaque, 2010). They also noted that construction and engineering services industry play an important role in the economic uplift and development of the country. It can be regarded as a mechanism of generating employment and offering job opportunities to millions of unskilled, semi-skilled and skilled work force. It also plays a key role in generating income in both formal and informal sector. It supplements the foreign exchange earnings derived from trade in construction material and engineering services. For a developing nation such as Nigeria, the actualization of the nation’s vision partly depends on the existence of a reliable and competitive local construction industry that is capable of delivering quality service and value for money in the development and maintenance of the physical infrastructures. Its role in the socio-economic development goes beyond its share in national output.

Risk management may also be described as “a systematic way of looking at areas of risk and consciously determining how each should be treated. It is a management tool that aims at identifying sources of risk and uncertainty, determining their impact, and developing appropriate management responses” (Uher, 2003). A systematic process of risk management has been divided into risk classification, risk identification, risk analysis and risk response, where risk response has further been divided into four actions, i.e. retention, reduction, transfer and avoidance (Flanagan & Norman, 1993; Berkeley, Humphreys, & Thomas, 1991). Hence risks should be identified, monitored and controlled on a regular basis to mitigate its effects. This statement confirmed that construction projects shall invariably or inadvertently fail even with adequate contingency plans because some of the risks impacting on the projects are unknown at the inception/planning phase and would not be planned for in the Contingency Plans, (Thinking bookworm (TB), 2012). They further defined the contingency plans as simply the alternative plan which will be used if possible foreseen risk event becomes a reality and this could help property developers to examine very critically every aspect of the operation and think both reactively and proactively. However it should be underlined that risk management is not a tool which ensures success but rather a tool which helps to increase the probability of achieving success. (Ewelina et al, 2011).

Nevertheless, Nigerian construction industries is growing in complexity and size and in order to be competitive at the global level; it must not approach construction safety as just another step in avoiding unwanted accidents/costs but as a strategic tool for maximizing competitiveness and profitability (Agwu, 2012). Safety is defined as the state of being safe (protected) from danger or harm according to the Oxford Advance Learners Dictionary. The Joint project of FIEC & EFBWW (2000) developed a strategic approach to safety that can be accomplished through a total safety practices philosophy which finds its roots from the total quality management principles. For moral, legal and economic reasons, the health and safety of every person, the security of goods and the protection of the environment, are essential aims which every company shares. These goals are only achieved and guaranteed if there is a policy orientation towards prevention of all health and safety (H&S) risks within each company.

The provision of a good Health and Safety practices System is inevitable in the Nigerian construction industries as the industries performance is solely dependent on the safety of the working environment. Zaynab & Mahmud (2012), noted that managing a project successfully means not just executing it according to specifications within the stipulated time and with budgeted funds but also with optimum safety. Hence, this study is on the Evaluation of construction Health and Safety practices on construction sites in Nigeria (case study of the building industry).

1.1 STATEMENT OF THE PROBLEM

The construction industry operates in a very uncertain environment where conditions can change due to the complexity of each project (Sanvido, Groleer, Partiff, Guveis, & Coyle, 1992). Risk and uncertainty are associated to any project regardless of the industry, and it differs from project to project; since every project is unique especially on construction sites (Gould & Joyce, 2002). In other words, adequate comprehensive knowledge of the commercial, political, construction, and operations uncertainties and risks associated with a project determines the success/delivery of such project and in some cases the viability of the organization, (Walewski & Gibson, 2003). Despite the awareness of risks and their consequences, there are still many practitioners that have not realized the importance of including risk management in the process of project delivery (Smith, Mema & Jobbling, 2006). Thereby contradicting the fact that the industry is trying to be more cost and time efficient as well as have more control over projects (Ewelina et al, 2011).

In consonance with the foregoing therefore, the importance of a good implemented Health and Safety practices model/practice cannot be over-emphasized. It becomes a problem/challenge where the future (e.g. cost, profit, time of completion, etc.) of a project can not be fathomed with relative certainty in the building sector of the construction industry on the ground of no provision for health and safety practices.

1.2 AIMS AND OBJECTIVES

The overall aim of this research was to investigate the extent of the knowledge of Health and Safety practices among construction workforce and the compliance with the Health and Safety requirements on construction sites. This aim was actualized in the following specific objectives, to:

Evaluate the construction risks inherent in the building sector of the construction industry;
Examine the Health and Safety practices processes adopted by the construction industry in Nigeria;
Validate the existence of the identified factors militating against Health and Safety practices on construction sites in Nigeria; and
Investigate if there are established frameworks for effective Health and Safety risk management on construction sites in Nigeria.

1.3 RESEARCH QUESTIONS

This study was carried out in such a way that it was able to provide answer(s) to the following questions.

Are there existing processes of managing Health and safetys in Nigerian construction industries?
Could there be factors militating against the implementation of Health and Safety practices on construction sites in Nigeria?
Are there any established frameworks for effective Health and Safety practices in Nigerian construction industries in line with international practice?

1.4 RESEARCH HYPOTHESIS

The research hypothesis that this study focused on to achieve the above stated objective are:

Health and safety has no significant management process in the Nigeria construction industry.
The construction industry in Nigeria has factors militating against Health and safety practices.
The Effectiveness of health and safety practices practices in the The construction industry of Nigeria is not dependent on an established framework.

1.5 SCOPE OF THE STUDY

This study is on the nature of an existing Health and Safety practices on construction sites in Nigeria. It focused on the building sector of the industry located within selected cities in Nigeria

1.6 SIGNIFICANCE OF THE STUDY

Health and Safety practices practices are not new in Nigeria but some construction companies perceive it differently. Although the parties concerned are to an extent employing the practice to the best of their knowledge since it has come to stay though ignorant of some practices. This research will therefore be of great benefit to: The parties responsible for ensuring the implementation of the internationally acceptable standards of health and safety on construction sites in Nigeria such as Government, clients, consultants, contractors, workers and civil society. Educating them to ensure that every construction contract takes comprehensive account of health and safety requirements for the project, environment and the workers. Management personnel on construction sites through suggesting proactive measurements that prevents incidents before they manifest as accidents, coordinating all health and safety aspects of the construction project, draft health and safety plans and verify any existing or proposed plans which comply with all relevant HSE construction regulations and requirements. It will also ensure the health and safety of workers, decrease accident risks and improve on-site productivity, gain adequate knowledge for future safety maintenance and create a long-term safety culture.

1.7 ORGANIZATION OF THE STUDY

This study comprises five distinct chapters presented as follows:

Chapter one of this study comprises the introduction, the background of the study, the statement of problem, aim and objectives, significance of the study and finally the organization of the study.

Chapter two will comprise a review of the past and present literature on occupational health and safety by building contractors.

Chapter three of the study will describe the research methodology which will consists of the research design, population, sample and sample techniques, data collection procedure, data analysis, the software to be used, and the source of data used in the empirical analysis.

Chapter four will consists of data presentation, analysis and the discussion of findings.

The final chapter, chapter five, will contain the summary, conclusions drawn from the study and also contributions and recommendations.

Due to the economy, the research study is limited to evaluate health and safety on building construction site, using Imo State as a case study. The researcher is compelled to limit it to this, due to time and financial constraint.

1.8 DEFINITION OF TERMS

Health: The Oxford dictionary of current English language defines health as the state of being free form illness or injury; a person’s mental or physical condition.

Collins gem English language dictionary defines health as the state of soundness of the body. It is the condition of the body.

Webster’s Encyclopedia dictionary of English language put it that “health” is the state of fitness of the body or mind with reference to soundness and vigor.

Safety: The Oxford dictionary of current English language defines safety as the condition of being safe.

Webster’s encyclopedia dictionary of English language defines safety as the conditions of being safe from risk or danger. It is the quality of averting or not causing injury, danger or loss.

Scaffold: Scaffolding is a kind of undulating ladder which is used as a temporary elevated frame work for the supporting of materials and workers during a construction work, specifically for buildings and other kinds of larger structures. Scaffolding is ideally suitable for construction sites, as they are adjustable in height, giving the workers an ability to stand on them have the capacity to hold many materials and persons.

Management: H.R. Light (1968 – 1971) in his book “the nature of management” defines management as the body of knowledge about managing. He went further to describe management as the process of planning, organizing, directly, and coordinating men, materials, machines and money so as to secure the optimum achievement of objectives.

Get the Complete Project

This is a premium project material and the complete research project plus questionnaires and references can be gotten at an affordable rate of N3,000 for Nigerian clients and $8 for International clients.

Click here to Get this Complete Project Chapter 1-5

You can also check other Research Project here:

Need a Project Writer for a Different Topic

Education

Click here to Get The Complete Research Project Chapter 1-5

Full Project – EVALUATION OF HEALTH AND SAFETY PRACTICES ON CONSTRUCTION SITES IN NIGERIA

Related Posts

Leave a Reply